On Site Machine Repairs Machines at Flagship Location
Sew Jersey is an Authorized Service Center for Brother, Bernina, Janome, Necchi, and Elna. With two on-site technicians, we are equipped to service all brands, types, and models of sewing machines.
Our turnaround time is approximately 3 to 7 days.
You can drop off your machine at any of our Sew Jersey locations without needing an appointment.
We will call you once your machine's servicing is complete.
Bench Charge is $50.00
Basic Service Starts at $99.00
Adjustment Checks
- Needle bar height
- Hook timing
- Feed timing
- Belt tension
- Gear spacing
- Motor speed
Cleaning
- Complete blowout
- Bobbin case cleaning tension spring cleaning
- Sewing head brush out
- Motor blow out
Oiling
- Primary drive shaft bearings are oiled
- All moving sections of the shuttle assembly and sewing head are oiled through
- Proper grease for gears is applied after cleaning the gear teeth properly
Tension Balance
- The upper tension is set to the bobbin tension so that the factory setting is set and the stitch is properly balanced on both sides so the stitch is properly locked.
- Obstructions to proper stitch creation is checked, burrs, pressure foot damage, or needle plate damage
- Pressure bar pressure is set to create the proper stitch
Test Sew Out
- Primary stitch functions are tested with multiple needle positions in at least three stitch tests
- The feed functions are also tested in several length settings and reverse functions
- Embroidery samples for embroidery machines